Porting the LatticeMico32 to a ZTEX FPGA Board

In this project the LatticeMico32 is ported to a ZTEX USB-FPGA Module 1.11c.

The LatticeMico32 is an open source soft core RISC processor provided by Lattice. The Lattice system generates a set of Verilog files which can be ported to the FPGA.

The design is verified by an example firmware running on the LatticeMico32 processor. This firmware makes a LED blinking and is written in C.

• The project page
• Guide about how to port the LatticeMico32 to a ZTEX FPGA Board, including the C-code programming stage in the Lattice system
• A YouTube video of the running processor
• Homepage of the LatticeMico32 processor