Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revision | |
en:ztex_boards:ztex_fpga_boards:high_speed_configuration [2016/09/11 14:10] – stefan | en:ztex_boards:ztex_fpga_boards:high_speed_configuration [2016/11/24 23:30] (current) – [High speed FPGA configuration] stefan |
---|
| [[http://www.ztex.de/usb-fpga-1/usb-fpga-2.14.e.html|USB-FPGA Modules 2.14]] | about 3 MByte/s | up to 26 MByte/s | | | [[http://www.ztex.de/usb-fpga-1/usb-fpga-2.14.e.html|USB-FPGA Modules 2.14]] | about 3 MByte/s | up to 26 MByte/s | |
| [[http://www.ztex.de/usb-fpga-2/usb-fpga-2.16.e.html|USB-FPGA Modules 2.16]] | about 0.6 MByte/s | up to 24 MByte/s | | | [[http://www.ztex.de/usb-fpga-2/usb-fpga-2.16.e.html|USB-FPGA Modules 2.16]] | about 0.6 MByte/s | up to 24 MByte/s | |
| | [[http://www.ztex.de/usb-fpga-1/usb-fpga-2.18.e.html|USB-FPGA Modules 2.18]] | about 3 MByte/s | up to 26 MByte/s | |
| |
High speed configuration is supported by [[en:software:default_firmware|Default Firmware]]. | High speed configuration is supported by [[en:software:default_firmware|Default Firmware]]. |