Differences

This shows you the differences between two versions of the page.

--- en:ztex_boards:ztex_fpga_boards:power_supply_selection [2011/12/05 22:11] – 84.181.74.229
+++ en:ztex_boards:ztex_fpga_boards:power_supply_selection [2014/05/19 10:19] – 84.181.54.192
@@ Line 1: / Line 1: @@
 ====== Power supply selection guide ======
-Experimental Boards [[http://www.ztex.de/usb-fpga-1/exp-1.2.e.html|1.2]], [[http://www.ztex.de/usb-fpga-1/exp-1.3.e.html|1.3]] and [[http://www.ztex.de/usb-fpga-1/exp-1.10.e.html|1.10]], [[http://www.ztex.de/usb-fpga-1/pwr-1.1.e.html|Power Supply Modules 1.1]] and [[http://www.ztex.de/usb-fpga-1/usb-fpga-1.15x.e.html|USB-FPGA Modules 1.15x]] have valid input voltage range of 4.5V to 16V (absolute maximum: 18V).
+Experimental Boards [[http://www.ztex.de/usb-fpga-1/exp-1.2.e.html|1.2]], [[http://www.ztex.de/usb-fpga-1/exp-1.3.e.html|1.3]] and [[http://www.ztex.de/usb-fpga-1/exp-1.10.e.html|1.10]], [[http://www.ztex.de/usb-fpga-1/pwr-1.1.e.html|Power Supply Modules 1.1 and 1.2]] and [[http://www.ztex.de/usb-fpga-1/usb-fpga-1.15x.e.html|USB-FPGA Modules 1.15x]] have valid input voltage range of 4.5V to 16V (absolute maximum: 18V).
 All products are equipped with with a standard DC connector with 5.5mm outer diameter and 2.1mm center pin diameter. The center pin is the positive pole, the outer contact is negative pole.