[[en:discussions:device_overheating_message]]
 
Trace:
     de     

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
en:discussions:device_overheating_message [2013/06/11 11:29] – [Device overheating message] 178.24.145.101en:discussions:device_overheating_message [2013/06/11 21:07] – [Device overheating message] 77.64.252.71
Line 7: Line 7:
 Hi, I'm running my FPGA 1.15b + experimental board 1.3 on Linux.  Hi, I'm running my FPGA 1.15b + experimental board 1.3 on Linux. 
  
-As soon as I start the BTCMiner, I'm getting the following error:+I was able to upload the firmware to eeprom with the following command:
  
-2013-06-10T19:31:43: ztex_ufm1_15b1-04A39E20AD: New device: bitfile=ztex_ufm1_15b1   f_default=184.00MHz  f_max=224.00MHz  HpC=0.5H+vp@deathstar:~/Downloads/ztex/ztex/java/FWLoader$ sudo ./FWLoader -ue ../../../btcminer/ztex_ufm1_15b1.ihx  
 +Firmware to EEPROM upload time: 2581 ms
  
-2013-06-10T19:31:43: ztex_ufm1_15b1-04A39E20AD: MAC address: 0004a39e20ad+the ihx i've got from btcminer source, because I wasn't able to find it in the Download package offered in the download area. if its there, please advise me. 
  
-2013-06-10T19:31:43: ztex_ufm1_15b1-04A39E20AD: FPGA 1: configuration time: 235 ms+then I tried to run it as:
  
-2013-06-10T19:31:44: ztex_ufm1_15b1-04A39E20AD-1: New FPGA+    java -cp ~/ZtexBTCMiner-121126.jar BTCMiner -host "http://mint.bitminter.com:8332" -u foo -p bar -d 0
  
-2013-06-10T19:31:44: ztex_ufm1_15b1-04A39E20AD-1: Set frequency to 184.00MHz+    ztex_ufm1_15b1-04A39E20AD: New device: bitfile=ztex_ufm1_15b1   f_default=184.00MHz  f_max=224.00MHz  HpC=0.5H 
 +    ztex_ufm1_15b1-04A39E20AD: MAC address: 0004a39e20ad
  
-2013-06-10T19:31:44: ztex_ufm1_15b1-04A39E20AD-1: Using LongPolling URL http://mint.bitminter.com:8332/lp+    Warning: Possible Bitstream CRC error: INIT_B_HIST=111 
 +     
 +    ztex_ufm1_15b1-04A39E20AD: FPGA 1: configuration time: 231 ms 
 +    ztex_ufm1_15b1-04A39E20AD-1: New FPGA 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency to 184.00MHz
  
-2013-06-10T19:31:46: ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 184.00MHz to 176.00MHz 
  
-2013-06-10T19:31:48: ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 176.00MHz to 184.00MHz+then after that It just quits with the message:
  
-2013-06-10T19:31:51: ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 184.00MHz to 176.00MHz+    ztex_ufm1_15b1-04A39E20AD-1: Using LongPolling URL http://mint.bitminter.com:8332/lp 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 184.00MHz to 176.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 176.00MHz to 184.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 184.00MHz to 176.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 176.00MHz to 168.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Error: Hash rate drop of 8.7% detect. This may be caused by overheating. FPGA is shut down to prevent damage.: Disabling device
  
-2013-06-10T19:31:54: ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 176.00MHz to 168.00MHz+if i set the BTCMiner parameter -oh to 1.0 I don't get the CRC error but the frequency goes down like:
  
-2013-06-10T19:31:54: ztex_ufm1_15b1-04A39E20AD-1: Error: Hash rate drop of 8.7% detect. This may be caused by overheating. FPGA is shut down to +    ztex_ufm1_15b1-04A39E20AD-1: Using LongPolling URL http://mint.bitminter.com:8332/lp 
- prevent damage.: Disabling device+    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 184.00MHz to 176.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 176.00MHz to 184.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 184.00MHz to 176.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 176.00MHz to 168.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 168.00MHz to 160.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: f=160.00MHz,  submitted 0 new nonces,  luckFactor=0.00 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 160.00MHz to 152.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 152.00MHz to 144.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 144.00MHz to 136.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 136.00MHz to 128.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: f=128.00MHz,  submitted 0 new nonces,  luckFactor=0.00 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 128.00MHz to 120.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 120.00MHz to 112.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 112.00MHz to 104.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 104.00MHz to 96.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: f=96.00MHz,  submitted 0 new nonces,  luckFactor=0.00 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 96.00MHz to 88.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 88.00MHz to 80.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 80.00MHz to 72.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 72.00MHz to 64.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 64.00MHz to 56.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: f=56.00MHz,  submitted 0 new nonces,  luckFactor=0.00 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 56.00MHz to 48.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 48.00MHz to 40.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 40.00MHz to 32.00MHz 
 +    ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 32.00MHz to 24.00MHz
  
  
-What are the possible causes? As power supply I'm using this one from Conrad http://www.conrad.de/ce/de/product/512898/VOLTCRAFT-FTPS-12-60W-Tischnetzteil-Getaktet-Schaltnetzteil-12-VDC-5000-mA-60-Watt?queryFromSuggest=true 
  
-~~DISCUSSION~~+What are the possible causes? As power supply I'm using this one from Conrad http://www.conrad.de/ce/de/product/512898/VOLTCRAFT-FTPS-12-60W-Tischnetzteil-Getaktet-Schaltnetzteil-12-VDC-5000-mA-60-Watt?queryFromSuggest=true 
  
 +~~DISCUSSION~~
  
 
 
Recent changes RSS feed Creative Commons License Powered by PHP Debian Driven by DokuWiki
[ZTEX Home] [Imprint] [Privacy policy]