Differences
This shows you the differences between two versions of the page.
Next revision | Previous revision |
en:discussions:device_overheating_message [2013/06/11 07:51] – created 178.24.145.101 | en:discussions:device_overheating_message [2017/02/04 19:12] (current) – gelöscht stefan |
---|
<- [[:en:discussions:start]] | |
| |
====== Device overheating message ====== | |
| |
//, 2013/06/11 09:46 // | |
| |
Hi, I'm running my FPGA 1.15b + experimental board 1.3. | |
| |
As soon as I start the BTCMiner, I'm getting the following error: | |
| |
2013-06-10T19:31:43: ztex_ufm1_15b1-04A39E20AD: New device: bitfile=ztex_ufm1_15b1 f_default=184.00MHz f_max=224.00MHz HpC=0.5H | |
| |
2013-06-10T19:31:43: ztex_ufm1_15b1-04A39E20AD: MAC address: 0004a39e20ad | |
| |
2013-06-10T19:31:43: ztex_ufm1_15b1-04A39E20AD: FPGA 1: configuration time: 235 ms | |
| |
2013-06-10T19:31:44: ztex_ufm1_15b1-04A39E20AD-1: New FPGA | |
| |
2013-06-10T19:31:44: ztex_ufm1_15b1-04A39E20AD-1: Set frequency to 184.00MHz | |
| |
2013-06-10T19:31:44: ztex_ufm1_15b1-04A39E20AD-1: Using LongPolling URL http://mint.bitminter.com:8332/lp | |
| |
2013-06-10T19:31:46: ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 184.00MHz to 176.00MHz | |
| |
2013-06-10T19:31:48: ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 176.00MHz to 184.00MHz | |
| |
2013-06-10T19:31:51: ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 184.00MHz to 176.00MHz | |
| |
2013-06-10T19:31:54: ztex_ufm1_15b1-04A39E20AD-1: Set frequency from 176.00MHz to 168.00MHz | |
| |
2013-06-10T19:31:54: ztex_ufm1_15b1-04A39E20AD-1: Error: Hash rate drop of 8.7% detect. This may be caused by overheating. FPGA is shut down to | |
prevent damage.: Disabling device | |
| |
| |
What are the possible causes? As power supply I'm using this one from Conrad http://www.conrad.de/ce/de/product/512898/VOLTCRAFT-FTPS-12-60W-Tischnetzteil-Getaktet-Schaltnetzteil-12-VDC-5000-mA-60-Watt?queryFromSuggest=true | |
| |
~~DISCUSSION~~ | |
| |
| |