Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | Next revisionBoth sides next revision |
| en:ztex_boards:ztex_fpga_boards:jtag [2010/12/03 14:32] – stefan | en:ztex_boards:ztex_fpga_boards:jtag [2011/01/03 14:32] – The JTAG connector is only 8 pins, not 9 146.103.254.11 |
|---|
| ====== JTAG ====== | ====== JTAG ====== |
| |
| The FPGA's on [[http://www.ztex.de/usb-fpga-1/index.e.html|ZTEX FPGA Boards]] can be configured either via USB or via JTAG. JTAG signals are available at Pins D29 to D32 of the I/O connector. If the [[http://www.ztex.de/usb-fpga-1/exp-1.1.e.html|Experimantal Board]] or the [[http://www.ztex.de/usb-fpga-1/pwr-1.0.e.html|Power Supply Module]] is used the JTAG signals are provided on a 9 pin connector with the following pin allocation: | The FPGA's on [[http://www.ztex.de/usb-fpga-1/index.e.html|ZTEX FPGA Boards]] can be configured either via USB or via JTAG. JTAG signals are available at Pins D29 to D32 of the I/O connector. If the [[http://www.ztex.de/usb-fpga-1/exp-1.1.e.html|Experimantal Board]] or the [[http://www.ztex.de/usb-fpga-1/pwr-1.0.e.html|Power Supply Module]] is used the JTAG signals are provided on a 8 pin connector with the following pin allocation: |
| |
| ^ Pin ^ Description ^ | ^ Pin ^ Description ^ |
